Bosch Series 4 PKE611BA2E User Manual

To turn on the Bosch Series 4 PKE611BA2E Hob, press the power button located on the control panel. Then, select the desired cooking zone by pressing the corresponding button and adjust the heat setting using the plus or minus buttons.
If the hob is not heating up, ensure that it is properly connected to the power supply. Check the circuit breaker or fuse to ensure it has not tripped. If the problem persists, contact Bosch customer support for further assistance.
Use a soft cloth or sponge with a mild cleaning agent suitable for glass surfaces. Avoid using abrasive cleaners, as they can scratch the hob's surface. For stubborn stains, use a scraper designed for glass surfaces.
Use cookware with flat, smooth bases for optimal heat transfer. Induction-compatible cookware, marked with an induction symbol, is recommended to ensure proper functionality and efficiency.
To lock the control panel, press and hold the key lock button until the indicator light turns on. This will prevent any changes to the settings until the lock is deactivated by holding the same button again.
Refer to the user manual for the specific error code to understand its meaning. Common issues can often be resolved by resetting the hob by turning it off and on again. If the error persists, contact Bosch customer service.
It is not recommended to use aluminum foil on the hob's surface as it can melt or cause damage to the glass. Instead, use appropriate cookware for cooking purposes.
Avoid sliding cookware across the hob surface. Use cookware with smooth bottoms and clean the hob regularly to remove any particles that might cause scratches.
Replacing a faulty burner should be done by a qualified technician to ensure safety and proper functionality. Contact Bosch service for assistance in replacing a burner.
Regularly clean the hob with suitable cleaning products for glass surfaces. Check connections if the hob is not functioning properly and ensure cookware is compatible and in good condition. Schedule professional maintenance checks as needed.