Bosch Series 4 KIN85VSE0G User Manual
![Bosch Series 4 KIN85VSE0G Refrigerator manual cover](/images/pEPSmmmxHMephxSVybwpLOku/thumbs/thumb175x175.webp)
To adjust the temperature, open the refrigerator and locate the control panel. Press the 'Fridge' button to adjust the fridge temperature and the 'Freezer' button for the freezer. Use the '+' and '-' keys to set your desired temperature.
First, check if the appliance is plugged in and the power is on. Ensure the doors are sealing properly and not blocked by any items. Clean the condenser coils and ensure there is adequate ventilation around the refrigerator. If the issue persists, contact Bosch customer service.
To change the water filter, locate the filter compartment inside the fridge. Turn the old filter counterclockwise to remove it. Insert the new filter and turn it clockwise until it locks in place. Run water through the dispenser for a few minutes to clear any air and impurities.
Remove all food and shelves before cleaning. Use a solution of mild detergent and warm water to wipe down the interior surfaces. Rinse with clean water and dry with a soft cloth. Avoid using abrasive cleaners or tools that might scratch the surfaces.
To activate the SuperCooling function, press the 'Super' button on the control panel. This function will rapidly lower the temperature to quickly chill new groceries. It will automatically deactivate after a set period.
Water pooling can be caused by a blocked defrost drain. Clean the drain using a small funnel and warm water to clear any blockages. Ensure that the fridge is level and draining properly.
The Bosch KIN85VSE0G features NoFrost technology, which eliminates the need for manual defrosting. However, if you notice any ice build-up, check the door seals and ensure the freezer is not overfilled.
Unusual noises can be caused by various factors. Ensure the appliance is level and not touching the wall or cabinets. Check for any loose items inside the fridge. If the noise continues, contact Bosch service for further assistance.
To lock the control panel, press and hold the 'Lock' button for a few seconds until the lock icon appears. This will prevent any accidental changes to the settings. To unlock, press and hold the 'Lock' button again.
Yes, the door swing can be reversed. Refer to the user manual for detailed instructions or contact a professional technician to perform the reversal to ensure it is done correctly.