Bosch Series 2 SPV2HKX39G Quick Instruction Guide
![Bosch Series 2 SPV2HKX39G Dishwasher manual cover](/images/jOaQsffVNWLtlynQeiMxjbWb/thumbs/thumb175x175.webp)
To start a wash cycle, load the dishwasher, add detergent, close the door, select the desired program using the control panel, and press the Start button.
Check the filter and drain hose for blockages. Ensure that the drain hose is correctly positioned and not kinked. Clean the filter if necessary and try running the cycle again.
Regularly clean the filter, spray arms, and door seals. Run an empty cycle with a dishwasher cleaner or vinegar to remove limescale and grease buildup.
The "Eco" program is designed to save energy and water while effectively cleaning dishes. It uses lower temperatures and a longer duration to achieve efficient cleaning.
Error code E15 indicates a water leakage detected by the dishwasher's safety system. Check for leaks in the hose connections and the base of the appliance. If the issue persists, contact Bosch support.
Ensure that the rinse aid compartment is filled, as it helps with drying. Additionally, make sure the "Extra Dry" option is selected if available. Avoid overloading the dishwasher.
Yes, you can use tablet detergents. Place the tablet in the detergent dispenser and ensure it is closed properly before starting a cycle.
To reset the dishwasher, press and hold the Start button for about 3 seconds until the display shows the reset signal, then release the button.
Place items with the dirty side angled downwards and ensure they do not block the spray arms. Avoid nesting items and ensure that larger items do not prevent the detergent dispenser from opening.
Ensure the dishwasher is level and properly installed. Check that dishes and trays are not touching each other and that the spray arms can rotate freely.