Bosch High Pressure Detergent Nozzle Instruction Manual
![Bosch High Pressure Detergent Nozzle Accessory manual cover](/images/XKWMFaWUaXosAdxUqlUslEFk/thumbs/thumb175x175.webp)
To attach the Bosch High Pressure Detergent Nozzle, ensure the pressure washer is turned off. Remove any existing nozzle, align the detergent nozzle with the lance, and twist until it locks into place.
First, check the detergent tank to ensure it is filled. Then, inspect the nozzle for any blockages and clean it if necessary. Make sure the pressure washer is set to a low-pressure setting to allow detergent flow.
It is recommended to use detergents specifically designed for pressure washers. Avoid using corrosive or abrasive chemicals, as they may damage the nozzle or pressure washer components.
Detach the nozzle from the pressure washer and rinse it with clean water. Use a soft brush to remove any residue. Allow it to dry completely before storage.
The optimal pressure setting is usually low to medium, as high pressure can prevent the detergent from being drawn into the nozzle effectively. Refer to your pressure washer's manual for specific settings.
An uneven spray pattern can be caused by blockages in the nozzle. Clean the nozzle and check for debris. Ensure the nozzle is not worn or damaged.
Most Bosch nozzles are designed for use with cold water. Check the specifications of your specific model to see if it supports hot water usage.
After cleaning, store the nozzle in a dry, cool place away from direct sunlight. Ensure it is completely dry to prevent mold or mildew growth.
Check for any loose connections and tighten them. Inspect the seals and O-rings for wear and replace them if necessary.
Some models allow for adjustment of detergent concentration. Refer to your nozzle's manual for detailed instructions on adjusting the concentration settings.