Bosch CityMower 18V-32-300 User Manual

To safely start the Bosch CityMower 18V-32-300, first ensure the battery is fully charged and properly inserted. Press the safety button on the handle, then pull the lever towards the handlebar to start the motor.
If the lawnmower doesn't start, check that the battery is charged and correctly installed. Ensure the safety button is being pressed before pulling the lever. Inspect for any obstructions in the blade area.
The cutting height can be adjusted using the lever located near the wheels. Move the lever to select the desired height setting, ranging from 30mm to 60mm.
Regularly clean the blade and deck area to prevent grass buildup. Check the blade for sharpness and replace if necessary. Also, ensure the battery is charged and stored properly during the off-season.
Remove the battery from the lawnmower and connect it to the provided charger. Plug the charger into a power outlet. The charging indicator will show when the battery is fully charged.
If the lawnmower stops during operation, check for obstructions blocking the blade. Inspect the battery charge level and ensure it is properly seated. Allow the motor to cool down if overheated.
It is not recommended to use the Bosch CityMower 18V-32-300 in wet conditions as it may damage the mower and affect performance. Wait for the grass and weather to dry before mowing.
Clean the lawnmower thoroughly and remove the battery. Store the mower in a dry, cool place and the battery in a slightly charged state. Cover the mower to protect it from dust and debris.
Check if the blade is dull or damaged and replace it if needed. Ensure the cutting height is set correctly for the grass length. Clear any grass clippings stuck under the deck.
Ensure that all parts are tightly fitted and the blade is sharp. Operating the mower on dry grass and regularly maintaining the machine can help reduce noise levels.