Bosch 0 601 B43 000 Instruction Manual

To change the blade, first unplug the saw. Use the provided wrench to loosen the blade bolt. Remove the old blade and replace it with a new one, ensuring the teeth face in the correct direction. Tighten the bolt securely.

Overheating can be caused by prolonged usage or by a dull blade creating excess friction. Ensure the blade is sharp and allow the saw to cool down between extended periods of use.

To prevent kickback, always use a sharp blade, maintain a firm grip on the saw, and ensure the workpiece is securely supported. Avoid cutting warped or twisted wood.

Regular maintenance includes cleaning the saw after each use, checking for loose bolts, and ensuring the blade is sharp. Lubricate moving parts as needed and inspect the power cord for damage.

If the saw is not starting, check if it is plugged in and the power switch is on. Inspect the power cord for damage and ensure the fuse or circuit breaker is not tripped.

To adjust the cutting depth, loosen the depth adjustment lever, set the desired depth by moving the base plate, and then tighten the lever to secure it in place.

This saw is primarily designed for cutting wood. Using it to cut metal may require a special blade and could void the warranty. Consult the manual or a professional for guidance.

Always wear safety goggles and ear protection. Ensure the work area is clean and well-lit. Keep hands away from the blade and never remove safety guards.

To achieve accurate cuts, ensure the blade is properly aligned with the base plate. Use a square to check alignment and adjust the bevel settings as needed.

Excessive vibration can be due to an unbalanced blade or loose parts. Check that the blade is correctly installed and inspect the saw for any loose components.