Bontempi 16 6125 Digital Owner's Manual
![Bontempi 16 6125 Digital Keyboard manual cover](/images/FlWgAQKPTkGbVFZDPReCMBlk/thumbs/thumb175x175.webp)
To turn on the Bontempi 16 6125 Digital Keyboard, locate the power switch on the top left corner of the keyboard and switch it to the 'ON' position. Ensure that the keyboard is plugged into a power source.
First, check if the volume is turned up. If the volume is adequate, ensure that the keyboard is not in 'Mute' mode. Also, verify that the headphones are not plugged in. If the problem persists, try resetting the keyboard by turning it off and on again.
To connect the keyboard to an external speaker, use an audio cable with a 3.5mm jack. Plug one end into the 'Audio Out' port on the keyboard and the other end into the 'Audio In' or 'Aux' port on the speaker.
Yes, the Bontempi 16 6125 Digital Keyboard has a built-in recording function. To record, press the 'Record' button, play your music, and then press the 'Stop' button when done. You can playback using the 'Play' button.
To change the instrument sound, press the 'Tone' button and use the number keys to enter the code of the desired instrument sound. Refer to the user manual for a list of available sounds and their corresponding codes.
Regularly dust the keyboard with a soft, dry cloth. Avoid using cleaning solvents. Check power cables for any signs of wear. Store the keyboard in a dry place away from direct sunlight and extreme temperatures.
To reset the keyboard to factory settings, press and hold the 'Function' button while turning on the power. Continue holding until the reset is confirmed on the display.
An error message could indicate a system glitch or incorrect setting. Try turning off the keyboard and unplugging it for a few minutes before restarting. If the error persists, consult the troubleshooting section of the user manual.
Yes, you can use a sustain pedal with the Bontempi 16 6125. Connect the pedal to the 'Sustain' jack on the keyboard. Ensure the pedal is compatible with the keyboard model.
Check if the keyboard is properly connected to a power source and turned on. If the display remains off, try adjusting the contrast knob if available. If these steps don't help, the display might need servicing by a professional technician.