BMW X3 3.0i SAV X3 Series 2007 Owner's Manual
![BMW X3 3.0i SAV X3 Series 2007 manual cover](/images/8f03eea760161fa7024f6c57/thumbs/thumb175x175.webp)
The recommended oil type for the BMW X3 3.0i 2007 is SAE 5W-30 full synthetic motor oil. It's important to use oil that meets BMW Longlife-01 specifications.
To reset the service indicator light, turn the ignition to position 1 without starting the engine. Press and hold the trip odometer reset button until the service menu appears. Use the toggle button to select the item to reset and press the reset button again to confirm.
Common causes of engine overheating in a BMW X3 3.0i 2007 include a faulty thermostat, a leaking radiator, a malfunctioning water pump, or a clogged coolant hose. Regular maintenance can help prevent these issues.
It is generally recommended to change the transmission fluid every 60,000 to 100,000 miles. However, it's best to consult your owner's manual or a BMW service professional for specific guidance.
The recommended tire pressure for the BMW X3 3.0i 2007 is typically 32 PSI for the front tires and 38 PSI for the rear tires. Always check the placard on the driver's door jamb for the precise values.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Remove the cover, disconnect the electrical connector, and remove the old bulb. Insert the new bulb, reconnect the connector, and replace the cover.
The towing capacity of the BMW X3 3.0i 2007 is approximately 3,500 pounds. Ensure your vehicle is properly equipped with a tow package and check the owner's manual for detailed instructions.
To improve fuel efficiency, ensure regular maintenance, keep tires properly inflated, use high-quality fuel, and avoid rapid acceleration and excessive idling. Consider using cruise control on highways.
The check engine light could be triggered by various issues, including a loose gas cap, faulty oxygen sensor, or catalytic converter problems. It's advised to have the vehicle diagnosed by a professional using an OBD-II scanner.
To pair your phone, enable Bluetooth on your device. Access the iDrive menu, select "Communication," then "Manage Bluetooth devices," and choose "Add new device." Follow the on-screen prompts to complete the pairing process.