BMW 5 Series Radio and Information System 1997 Owner's Manual

To reset the radio, turn the ignition key to the "On" position without starting the engine. Press and hold the power button on the radio until it turns off and then on again. This should reset the radio.
If the radio display is not working, check for a blown fuse in the fuse box. If the fuse is intact, the issue might be with the radio's internal connections or the display itself, which may require professional repair.
Improving radio reception can be achieved by checking the antenna connections for corrosion or damage. Ensure the antenna mast is fully extended and consider using a signal booster if necessary.
To change the clock settings, press the 'Clock' button on the radio. Use the 'Set' button to adjust the hours and minutes, then press 'Clock' again to save the settings.
If a radio code is required, check the owner's manual or any documentation received with the vehicle. Alternatively, contact a BMW dealer with your VIN and radio serial number to obtain the code.
Static noise can be caused by electrical interference. Check the antenna connections, inspect the wiring for damage, and ensure that all connections are secure. Consider installing a noise filter if the problem persists.
Yes, you can replace the radio with a modern unit. You'll need a compatible mounting kit and wiring harness adapter. Professional installation is recommended to ensure compatibility and functionality.
To adjust audio balance and fade, use the radio's menu settings. Navigate to the 'Sound' options, and use the controls to adjust balance (left/right) and fade (front/rear) to your preference.
If the cassette player is not working, try cleaning the cassette deck with a cleaning cassette. If the problem persists, the deck may need repair or replacement, which should be performed by a professional technician.
To set radio presets, tune to the desired station, then press and hold one of the numbered preset buttons until you hear a beep. The station is now saved to that preset button.