BMW M6 Convertible M Series 2013 Owner's Manual
![BMW M6 Convertible M Series 2013 manual cover](/images/b2c1dddb9d91120b7ad7b52f/thumbs/thumb175x175.webp)
The recommended oil type for the BMW M6 Convertible 2013 is SAE 10W-60, which is a high-performance synthetic oil.
To reset the service light, turn the ignition to position 1 (do not start the engine), press and hold the trip odometer reset button until the service menu appears, navigate using the up/down buttons to select 'Reset', then press and hold the BC button until the display confirms the reset.
The recommended tire pressure for the BMW M6 Convertible 2013 is typically 33 psi for the front tires and 36 psi for the rear tires. However, always check the sticker on the driver's door jamb for the exact specifications.
To pair your phone, ensure Bluetooth is enabled on your phone, then access the iDrive menu on the BMW, select 'Telephone', then 'Bluetooth Devices', and 'Add New Device'. Select your phone from the list and confirm the pairing code on both devices.
The maintenance schedule includes an oil change every 10,000 miles or 12 months, brake fluid replacement every 24 months, and a vehicle check every 30,000 miles. Refer to the owner's manual for a detailed maintenance plan.
To operate the convertible top, the vehicle must be stationary. Press and hold the convertible top switch located on the center console until the top is fully opened or closed. The process will stop automatically when complete.
If the battery dies, you can jump-start the vehicle using jumper cables and another car or a portable jump starter. Connect the cables properly to the positive and negative terminals, start the assisting vehicle, then start your BMW. It's recommended to replace the battery if it frequently loses charge.
To improve fuel efficiency, ensure regular maintenance is performed, keep tires properly inflated, avoid excessive idling, and drive smoothly by avoiding rapid acceleration and heavy braking. Using the Eco Pro mode can also help enhance fuel efficiency.
Common issues include electrical system faults, oil leaks, malfunctioning convertible top mechanisms, and issues with the dual-clutch transmission. Regular inspections and maintenance can help identify and mitigate these problems early.
To replace a headlight bulb, first turn off the engine and remove the keys. Open the hood and locate the headlight assembly. Remove the cover from the back of the headlight, disconnect the wiring harness, and remove the old bulb. Insert the new bulb, reconnect the wiring, and replace the cover. Always check the owner's manual for specific instructions and safety precautions.