BMW M5 Sedan M Series 2007 Owner's Manual
![BMW M5 Sedan M Series 2007 manual cover](/images/385898e078ab98112e5c4514/thumbs/thumb175x175.webp)
The recommended oil type for the 2007 BMW M5 Sedan M Series is SAE 10W-60 synthetic motor oil. Always ensure that the oil meets BMW's Longlife-01 specifications.
To reset the service indicator, turn on the ignition without starting the engine, press and hold the odometer reset button until the service indicator light appears, then use the toggle button on the steering wheel to scroll through the menu and select the service to reset. Confirm by holding the BC button.
Common issues include VANOS system failures, SMG transmission problems, rod bearing wear, and electronic issues. Regular maintenance and timely inspections can help mitigate these problems.
The brake fluid in the 2007 BMW M5 should be changed every two years to ensure optimal braking performance and to prevent moisture build-up which can lead to corrosion.
Checking the transmission fluid level in the 2007 BMW M5 requires a specialized BMW diagnostic tool and should be performed by a professional mechanic due to the sealed nature of the transmission system.
To replace the air filter, open the hood, locate the air filter housing on the passenger side, unclip and remove the housing cover, take out the old filter, and insert the new one. Ensure all clips are securely fastened when reattaching the cover.
If your 2007 BMW M5 won't start, check the battery connections and charge, inspect the fuses, and ensure the key fob battery is functional. If the issue persists, it is advisable to consult a professional mechanic.
To improve fuel efficiency, maintain regular engine tune-ups, ensure tires are properly inflated, use recommended oil, and avoid aggressive driving habits. Regularly clean the air filter and fuel injectors to maintain optimal performance.
The recommended tire pressure for the 2007 BMW M5 is 32 psi for the front tires and 35 psi for the rear tires. Always refer to the placard located on the driver's side door jamb for the most accurate specifications.
To perform a soft reset of the iDrive system, press and hold the volume button for about 25 seconds until the system shuts down and restarts. This can resolve minor software glitches.