BMW 128i Coupe 1 Series 2008 Owner's Manual
![BMW 128i Coupe 1 Series 2008 manual cover](/images/56ec26117ca03f1c4b4c56b0/thumbs/thumb175x175.webp)
To reset the TPMS on your 2008 BMW 128i Coupe, start the engine and press the iDrive controller to access the menu. Select 'Vehicle Info', then 'Vehicle Status', followed by 'Reset'. Drive the car for a few minutes until the system resets.
For optimal performance, use synthetic oil with the viscosity grade of 5W-30. Make sure the oil meets BMW Longlife-01 specifications.
To replace the air filter, open the hood and locate the air filter housing on the driver's side. Unscrew the housing cover, remove the old filter, insert the new one, and secure the cover back in place.
Follow the BMW Condition Based Service (CBS) system, which monitors key components and alerts when maintenance is needed. Regular oil changes every 10,000 miles and brake fluid replacement every 2 years are recommended.
First, check the gas cap to ensure it's tightly closed. If the light remains, use an OBD-II scanner to read the error codes. Consult the vehicle's manual or a professional mechanic for code interpretation and necessary repairs.
Yes, to pair your phone, enable Bluetooth on your phone and on the car's iDrive system. Navigate to 'Communication' in the iDrive menu, select 'Bluetooth', and follow the prompts to pair your device.
First, ensure the vehicle is on a flat surface. Use the car's jack to lift the vehicle, remove the lug nuts with a wrench, replace the flat tire with the spare, and tighten the lug nuts before lowering the car.
Turn off the ignition and remove the key. Open the trunk and locate the battery compartment. Disconnect the negative cable first, then the positive. Remove the old battery, place the new one, and reconnect the cables in reverse order.
Common issues include electronic system malfunctions, oil leaks, and problems with the cooling system. Regular maintenance and timely repairs can mitigate these issues.
Maintain tire pressure, perform regular maintenance, and drive smoothly to enhance fuel efficiency. Avoid excessive idling and remove unnecessary weight from the vehicle.