Bissell Hydrowave 2571N User's Manual
![Bissell Hydrowave 2571N manual cover](/images/58f7cbd935d993e2f2e7794f/thumbs/thumb175x175.webp)
To set up your Bissell Hydrowave 2571N, start by assembling the handle into the base until it clicks. Fill the clean water tank with warm tap water and the recommended amount of Bissell cleaning solution. Attach the tank back into the machine, plug it in, and you're ready to clean.
If the machine is not picking up water, ensure the dirty water tank is seated properly and not full. Check that the nozzle and brush roll are clear of debris. Additionally, make sure the clean water tank is inserted correctly and securely.
It's recommended to clean the brush roll after every few uses or whenever you notice a decrease in cleaning performance. Remove the brush roll cover, take out the brush roll, and clean any hair or debris wrapped around it.
It is advised to use only Bissell-approved cleaning solutions in the Bissell Hydrowave 2571N to ensure optimal performance and to prevent damage to the machine. Using homemade solutions may void the warranty.
If streaks appear, check if the brush roll and nozzle are clean. Make sure the clean water tank has the right mixture of water and cleaning solution. Avoid moving the cleaner too quickly and ensure the floor type setting is correct for your carpet.
After using, empty and rinse both the clean and dirty water tanks. Clean the brush roll and nozzle if needed. Let all components dry completely before reassembling. Store the machine in a dry indoor area.
The filter should be checked and cleaned regularly. Remove it from the machine, rinse under warm water, and let it air dry completely before reinserting. Replace the filter if it's damaged or excessively dirty.
Ensure the power cord is plugged into a working outlet. Check the power switch and reset the circuit breaker if necessary. If the problem persists, inspect the power cord for damage.
The Bissell Hydrowave 2571N is designed primarily for carpet cleaning. Check the user manual to see if there are any specific settings or attachments for hard floor cleaning. Using it improperly on hard floors may not yield effective results.
To remove the nozzle, first make sure the machine is off and unplugged. Press the nozzle release button and pull the nozzle away from the machine. Rinse it under warm water to remove any debris, then let it dry completely before reattaching.