Bissell Crosswave User's Manual
![Bissell Crosswave manual cover](/images/ea2347f5bb2eaf1276b23616/thumbs/thumb175x175.webp)
To assemble the Bissell Crosswave, first attach the handle by inserting it into the body of the machine until it clicks into place. Then, attach the clean water tank by aligning it with the grooves and sliding it into position.
It is recommended to use Bissell's Multi-Surface, Wood Floor, or Area Rug cleaning solutions for optimal performance and to prevent damage.
To clean the brush roll, first unplug the machine. Remove the brush roll window by pulling up on the tab, then lift the brush roll out. Rinse it under warm water and allow it to dry completely before reinserting.
Streaks may occur if the brush roll is dirty or if there is an incorrect mixture of cleaning solution. Ensure the brush roll is clean and use the recommended solution mixture.
Check for blockages in the brush roll or hose, ensure the dirty water tank is not full, and confirm that filters are clean and properly placed.
It is recommended to replace the filter every 3-6 months, depending on usage frequency, to maintain optimal performance.
Yes, the Bissell Crosswave can be used on area rugs and low-pile carpets using the appropriate setting and cleaning solution.
After cleaning, ensure all parts are dry. Store the Crosswave upright in a cool, dry place. It is advisable to empty and rinse the tanks before storage.
First, check if the clean water tank is filled and properly seated. If the problem persists, inspect the spray tips for clogs and clean them if necessary.
Regularly clean the brush roll, empty and rinse the tanks after each use, and periodically check for blockages. Replace filters as recommended and ensure the unit is stored properly.