Arkitect ATVBTEL15 Instruction Manual

Pages 12

Year 0

Language(s)

of 12

Arkitect ATVBTEL15 Specification

The Arkitect ATVBTEL15 Mount is a versatile and robust mounting solution designed to accommodate a wide range of television sizes and models. Engineered for durability and ease of installation, it supports TVs ranging from 32 to 70 inches, with a maximum load capacity of 110 pounds (approximately 50 kilograms). The mount is constructed from high-grade steel, ensuring stability and long-lasting performance. It features a full-motion design that allows for extensive adjustability, including tilt angles from -5 to +15 degrees and a swivel range of up to 180 degrees, providing optimal viewing angles from various positions within a room. The mount offers an extension capability of up to 15 inches from the wall, while its low-profile design enables a snug fit at just 2.5 inches when retracted. It is compatible with VESA mounting patterns from 100x100mm to 600x400mm, allowing it to support a wide array of TV brands and models. The integrated cable management system helps maintain a clean and organized appearance by routing cables through the mount's arms, reducing clutter and enhancing the aesthetic of the mounted setup. Installation is simplified with the inclusion of comprehensive instructions and all necessary mounting hardware, including a built-in spirit level for precise alignment. The Arkitect ATVBTEL15 Mount is designed to meet high safety standards, ensuring that your TV remains securely mounted. This product is ideal for both residential and commercial environments, offering flexibility and reliability for a superior viewing experience.

Arkitect ATVBTEL15 F.A.Q.

How do I properly install the Arkitect ATVBTEL15 Mount on a drywall surface?

To install the Arkitect ATVBTEL15 Mount on drywall, ensure you locate the wall studs using a stud finder. Mark the positions, drill pilot holes, and use the provided screws and wall anchors for secure mounting. Follow the installation guide for detailed steps.

What should I do if the mount is not holding the TV securely?

First, verify that all screws are tightly fastened and that the mount is attached to the wall studs. Check if the TV is within the weight limit of the mount. If issues persist, consult the manual or contact support for further assistance.

How can I adjust the tilt angle of the Arkitect ATVBTEL15 Mount?

The Arkitect ATVBTEL15 Mount features a tilting mechanism. Loosen the tilt adjustment screws to set the desired angle, then re-tighten the screws to secure the position. Refer to the manual for detailed adjustment instructions.

Is the Arkitect ATVBTEL15 Mount compatible with all TV models?

The mount is compatible with most TVs that support VESA mounting standards within the specified size and weight limits. Check your TV's VESA pattern and weight to ensure compatibility.

What maintenance is required for the Arkitect ATVBTEL15 Mount?

Routinely check that all bolts and screws are secure. Inspect the mount for signs of wear or damage. Clean the mount with a soft cloth and mild detergent as needed. Avoid using abrasive cleaners.

How do I remove the TV from the Arkitect ATVBTEL15 Mount?

To remove the TV, make sure it is safely supported, then unscrew the security bolts or locking mechanisms. Lift the TV gently off the mount brackets. Refer to the manual for specific removal instructions.

Can the mount be used outdoors?

The Arkitect ATVBTEL15 Mount is designed for indoor use. Exposure to outdoor elements can cause rust and damage. Use only in recommended environments to ensure longevity and safety.

What tools are required for installing the Arkitect ATVBTEL15 Mount?

You'll need a drill, a Phillips screwdriver, a stud finder, a level, and a measuring tape. These tools will help ensure precise installation and secure mounting.

What is the maximum weight capacity of the Arkitect ATVBTEL15 Mount?

The maximum weight capacity of the mount is typically specified on the product packaging or manual. Ensure your TV does not exceed this limit to avoid damage or injury.

How do I ensure the mount is level during installation?

Use a level tool while marking the wall and during the installation process. Adjust as necessary before tightening screws to ensure the mount is perfectly horizontal.