Arkitect ATVBFS14 Instruction Manual

Pages 12

Year 0

Language(s)

of 12

Arkitect ATVBFS14 Specification

The Arkitect ATVBFS14 Mount is a versatile and robust mounting solution designed for secure and stable installation of flat-screen televisions. It supports screen sizes ranging from 32 to 65 inches and accommodates various VESA patterns up to 600x400 mm, ensuring compatibility with a wide array of television models. Constructed from high-grade steel, the mount offers a maximum weight capacity of 110 pounds, ensuring durability and reliability in holding larger screens.

The ATVBFS14 features a full-motion design, allowing for extensive adjustability to achieve optimal viewing angles. It provides a swivel range of up to 180 degrees and a tilt capability of -5 to +15 degrees, facilitating flexible positioning to reduce glare and enhance viewing comfort. The mount also extends up to 20 inches from the wall and retracts to just 2.8 inches, offering a sleek profile when not in use.

Installation is streamlined with the inclusion of a detailed instruction manual and all necessary hardware, ensuring a straightforward setup process. Integrated cable management channels help maintain a clean and organized appearance by concealing wires and cables. The Arkitect ATVBFS14 is engineered to meet rigorous quality and safety standards, providing peace of mind with its robust construction and reliable performance. Its modern design and functionality make it an ideal choice for residential and commercial settings, where flexibility and aesthetic appeal are key considerations.

Arkitect ATVBFS14 F.A.Q.

What are the steps to install the Arkitect ATVBFS14 Mount?

To install the Arkitect ATVBFS14 Mount, begin by locating the wall studs using a stud finder. Drill pilot holes into the studs, align the mount with the holes, and secure it using the provided screws. Ensure the mount is level before tightening all screws. Finally, attach the TV bracket to your TV and hang it onto the wall mount.

How can I adjust the tilt angle on the Arkitect ATVBFS14 Mount?

To adjust the tilt angle, loosen the tilt adjustment knob located at the base of the mount. Tilt the TV to the desired angle and then tighten the knob to secure the position.

What should I do if the TV is not level after mounting?

If the TV is not level, check that the mount is installed correctly and that all screws are tightened evenly. Use a level tool to verify the alignment. If needed, adjust the leveling screws on the mount until the TV is perfectly leveled.

Can I use the Arkitect ATVBFS14 Mount on drywall without stud support?

It is not recommended to mount the Arkitect ATVBFS14 on drywall without stud support as it may not hold the weight of the TV securely. Always mount directly into wall studs or use appropriate wall anchors designed for the weight of your TV.

How do I maintain and clean the Arkitect ATVBFS14 Mount?

To maintain the mount, periodically check that all screws are tight and the mount is secure. For cleaning, use a soft cloth dampened with mild soap and water to wipe down the mount. Avoid using abrasive cleaners or solvents.

What is the maximum weight capacity of the Arkitect ATVBFS14 Mount?

The Arkitect ATVBFS14 Mount has a maximum weight capacity of 66 lbs (30 kg). Ensure your TV does not exceed this weight limit for safe installation.

How can I troubleshoot if the TV is sagging on the mount?

If the TV is sagging, check that all installation screws are tight and the mount is properly secured to the wall. Ensure the tilt adjustment knob is tightened securely. If sagging persists, verify that the TV's weight does not exceed the mount's capacity.

Can the Arkitect ATVBFS14 Mount be used outdoors?

The Arkitect ATVBFS14 Mount is designed for indoor use. Using it outdoors may expose it to environmental conditions that could cause rust or damage. For outdoor installations, consider using a mount specifically designed for outdoor use.

What types of TVs are compatible with the Arkitect ATVBFS14 Mount?

The Arkitect ATVBFS14 Mount is compatible with most flat-screen TVs ranging from 32 to 55 inches, provided they do not exceed the weight capacity and have VESA mounting patterns supported by the mount.

Is it necessary to use all the mounting holes on the Arkitect ATVBFS14 when installing?

Yes, it is important to use all the provided mounting holes to ensure optimal stability and safety of the installation. This distributes the weight evenly and reduces the risk of the mount coming loose.