Ariens 936 Series 936078 Parts Manual
![Ariens 936 Series 936078 Tractor manual cover](/images/ZKuAbZqoXQrAiOJNQmIrAlfg/thumbs/thumb175x175.webp)
To start the Ariens 936078 Tractor, ensure the parking brake is engaged, the PTO is off, and the throttle is in the "start" position. Turn the ignition key clockwise to start the engine.
Use unleaded gasoline with a minimum octane rating of 87. Avoid using gasoline with more than 10% ethanol content.
Check the fuel level, ensure the battery is charged, inspect the spark plug for wear, and confirm that the air filter is clean. Also, ensure all safety features are properly engaged.
Perform oil changes every 50 hours of operation, replace the air filter annually, check and replace the spark plug every 100 hours, and inspect the blades regularly for sharpness.
To change the oil, run the engine for a few minutes to warm it up, then turn it off. Remove the oil drain plug and allow the old oil to drain completely. Replace the plug and fill with new oil as specified in the manual.
Ensure the PTO switch is engaged, check the drive belt for wear or damage, and inspect the PTO clutch for proper operation. Replace any damaged components.
Locate the height adjustment lever on the tractor and move it to the desired position. Ensure the deck is level and the blades are sharp for an even cut.
Excessive vibration could be due to unbalanced blades, loose engine mounting bolts, or debris lodged in the mower deck. Check and address these issues accordingly.
To improve traction, ensure the tires are properly inflated, consider using tire chains, and add weights to the rear of the tractor if necessary. Always mow up and down slopes, not across.
Clean the tractor thoroughly, change the oil, stabilize the fuel, disconnect the battery, and store it in a dry, sheltered place. Consider using a cover to protect it from dust and debris.