AGA Six Four Series DC6 FFD Natural Gas Owners Manual
![AGA Six Four Series DC6 FFD Natural Gas Cooker manual cover](/images/BZmSaHmRQZlpVVvUYENVcaPo/thumbs/thumb175x175.webp)
To ignite the burners, turn the corresponding control knob to the 'ignite' position and press down to release gas. While holding the knob down, press the ignition button until the burner lights.
First, ensure that the oven is properly connected to the gas supply. Check for any blocked vents or burners. If the problem persists, it may require a service check by a qualified technician.
It is recommended to clean the oven at least once a month to maintain optimal performance. Regular cleaning will prevent buildup of grease and food residues.
Conversion from natural gas to propane should only be performed by a qualified technician. Contact AGA support for guidance on conversion kits and safety procedures.
Regular maintenance tasks include cleaning the burners and oven, checking the door seals, and inspecting the gas connections for leaks. Annual professional servicing is also recommended.
Ensure the oven racks are placed correctly and avoid overcrowding. Check that the oven door seals are intact and not leaking heat. Rotating dishes midway through cooking can also help.
If you smell gas, immediately turn off the gas supply and extinguish any flames. Ventilate the area and contact a qualified technician to inspect the appliance for leaks or faults.
Use a soft cloth with warm, soapy water to clean the exterior surfaces. Avoid abrasive cleaners or pads that could scratch the finish. Dry thoroughly to prevent streaks.
Check if the cooker is properly plugged in and that the circuit breaker hasn't tripped. If the issue persists, the ignition switch may need replacement by a professional technician.
To enhance energy efficiency, ensure that the oven door is closed properly during cooking and avoid frequent openings. Regular maintenance of the burners will also ensure optimal gas usage.