AGA Rayburn 480GB Servicing Instructions

To ignite the burners, ensure the gas supply is on, then press and turn the control knob to the ignition position and hold it in. Press the ignition button until the burner lights. Hold the knob for a few seconds to allow the flame to stabilize before releasing.
Check that the gas supply is connected and turned on. Ensure the thermostat is set to a desired temperature. If the problem persists, it may require a service check to inspect the burners and thermostat functionality.
It is recommended to have a professional service your cooker annually to ensure optimal performance and safety. Regular cleaning of the ovens and hotplates should be done as needed.
Yes, the AGA Rayburn 480GB is a gas cooker and can be used during a power outage. However, the electric ignition will not work, so you will need to use a match or lighter to ignite the burners manually.
Allow the hotplates to cool, then wipe them with a damp cloth. For stubborn stains, use a non-abrasive cleaner. Avoid using excessive water to prevent damage to the cast iron.
The oven temperature can be adjusted using the thermostat control knob located on the front panel. Turn the knob to the desired temperature setting. Allow some time for the oven to reach the set temperature.
If you smell gas, immediately turn off the gas supply and ventilate the area. Check for any leaks or loose connections. Do not ignite any flames until the issue is resolved. Contact a professional technician for assistance if necessary.
Ensure regular maintenance and cleaning, use the correct size pans on burners, and keep the oven doors closed as much as possible to retain heat. Using lids on pans can also help to save energy.
Turn off the gas supply immediately, wait a few minutes for the gas to disperse, and then attempt to relight the burner. If the problem persists, check for blockages or contact a service technician.
Refer to the user manual for detailed instructions on switching between cooking functions. Typically, this involves selecting the desired function using the control knobs and setting the appropriate temperature.