Yamaha SRX120G 2016 Operator's Manual
![Yamaha SRX120G 2016 manual cover](/images/fa080b9059e23e9e30958885/thumbs/thumb175x175.webp)
The recommended fuel type for the Yamaha SRX120G 2016 is regular unleaded gasoline with a minimum octane rating of 87.
It is recommended to change the oil every 1000 miles or at the beginning of each season, whichever comes first.
The correct tire pressure for the Yamaha SRX120G 2016 is 6 psi for both front and rear tires.
To adjust the chain tension, first loosen the axle nut, adjust the tension with the adjuster bolts on each side of the rear axle, ensuring equal adjustments, and then retighten the axle nut.
Check the fuel level, ensure the kill switch is in the "run" position, check the spark plug for fouling, and verify that the choke is set correctly.
Regularly check the battery terminals for corrosion, ensure the battery is fully charged before storage, and use a battery tender during long periods of inactivity.
Clean the snowmobile thoroughly, add a fuel stabilizer to the gas tank, change the oil and filter, lubricate moving parts, and store it in a dry and cool place covered with a breathable cover.
First, remove the spark plug cap, use a spark plug socket to remove the old plug, check the gap on the new plug, and then install it by hand before tightening with a socket.
Check the air filter for dirt, inspect the spark plug for wear or fouling, ensure proper fuel mixture, and check for any air leaks in the intake system.
First, locate the carburetor adjustment screws, run the engine until warm, and adjust the idle and mixture screws to achieve a smooth idle. Refer to the service manual for specific settings.