Contents

Preface
- Please read these instruction carefully
- Dedicated to heating comfort
Table of contents
1 Key to symbols and safety instructions
- 1.1 Explanation of symbols
  - Warnings
  - Important information
  - Additional symbols
- 1.2 Safety instructions
- 2 About the appliance
  - 2.1 Designated use
  - 2.2 EU Declaration of Conformity
  - 2.3 Data plate
  - 2.4 General information on heat production
    - General functions
    - Automatic defrost function
  - 2.5 Overview of components
    - 2.5.1 Greenstar plus hybrid manager (internal unit)
    - 2.5.2 Greenstar plus External unit
- 3 Preparing the hybrid system for use
  - 3.1 Checking the operating pressure of the heating system
  - 3.2 Top up the heating system
  - 3.3 Overview of the FW200 programming unit
- 4 Starting and stopping the hybrid system
  - 4.1 Stopping the hybrid system
  - 4.2 Ensuring frost protection
  - 4.3 Restarting the hybrid system after an interruption in operation
  - 4.4 Setting up heating mode
  - 4.5 Setting hybrid systems
    - 4.5.1 Overview of the control modes
    - 4.5.2 Installer settings: HYBRID MENU
    - 4.5.3 MAIN MENU: Energy:price ratio
- 5 Environmental protection/disposal
  - Packaging
  - 5.1 Disposing of refrigerant
  - 5.2 Appliance disposal
- 6 Inspection and maintenance
  - 6.1 What makes regular maintenance important?
  - 6.2 Cleaning and care
- 7 Energy saving tips
  - Inspection/Maintenance
  - Heating controls
  - Thermostatic valves
  - Radiators
  - Underfloor heating system
  - Roof insulation
  - Window frames
  - Draughts
  - Curtains
- 8 Faults
  - 8.1 Immediately switch off the hybrid system
  - 8.2 Fault display on the controller FW 200
- 9 Your guarantee
  - Guarantee registration
  - For your own record
- 10 Appendix
  - 10.1 Cost weighting of electricity price - gas price

Worcester Greenstar Plus Hybrid 2012 Operating Instructions

Worcester Greenstar Plus Hybrid 2012 Heat Pump manual cover

Pages 12

Year 2012

Language(s)

of 12

Worcester Greenstar Plus Hybrid 2012 Heat Pump Specification

The Worcester Greenstar Plus Hybrid 2012 Heat Pump is an advanced heating solution that seamlessly integrates renewable energy technology with traditional boiler systems to optimize efficiency and reduce carbon emissions. This hybrid system combines the benefits of an air-to-water heat pump with a high-efficiency gas or oil boiler, providing flexible and sustainable heating. The unit is designed to deliver exceptional performance with a Seasonal Coefficient of Performance (SCOP) that ensures optimal energy usage throughout varying weather conditions. It intelligently switches between the heat pump and boiler, depending on factors such as outdoor temperature and energy cost, to maintain comfort while minimizing operational expenses.

The heat pump component harnesses ambient air to generate heat, significantly reducing reliance on fossil fuels and lowering energy bills. The Greenstar Plus Hybrid 2012 is equipped with an advanced control system that offers user-friendly interfaces and can be integrated with smart home technologies for remote operation and monitoring. This system is designed to be compatible with existing heating systems, making it an ideal choice for retrofitting projects. The compact design facilitates easy installation in a variety of property types, and its quiet operation ensures minimal disruption to household activities.

Additionally, the Worcester Greenstar Plus Hybrid 2012 Heat Pump is engineered with durability and reliability in mind, featuring robust components that require minimal maintenance. It adheres to stringent environmental standards, contributing to sustainable development goals. With its blend of innovative technology and traditional heating methods, this hybrid system offers an efficient and environmentally friendly solution for modern heating needs.

Worcester Greenstar Plus Hybrid 2012 Heat Pump F.A.Q.

How do I set the desired temperature on my Worcester Greenstar Plus Hybrid 2012 Heat Pump?

To set the desired temperature, use the control panel interface. Navigate to the temperature settings using the arrow buttons, then adjust to your preferred temperature using the plus and minus buttons. Ensure to save your settings.

What should I do if the heat pump is not starting?

If the heat pump is not starting, check if the unit is powered on and that the circuit breakers are not tripped. Inspect the thermostat settings, ensuring they are correctly configured. If the problem persists, contact a qualified technician.

How often should I perform maintenance on my Worcester Greenstar Plus Hybrid?

Regular maintenance should be performed annually by a qualified technician. However, basic checks such as cleaning filters can be done every few months to ensure optimal performance.

What does it mean if the system displays an error code?

An error code indicates a malfunction or issue with the system. Refer to the user manual to identify the specific error code and follow the recommended troubleshooting steps. Contact a service professional if needed.

Can I use the heat pump during cold weather?

Yes, the Worcester Greenstar Plus Hybrid is designed to operate efficiently in cold weather conditions. However, performance may vary depending on the outside temperature, so ensure your system is properly maintained for optimal operation.

How do I clean the air filters on my heat pump?

To clean the air filters, first turn off the heat pump. Open the front panel to access the filters, remove them, and clean with a vacuum or wash with mild soap and water. Allow them to dry completely before reinserting.

Is it normal for the heat pump to make noise?

Some noise from the heat pump is normal, such as the fan or compressor operating. However, loud or unusual noises may indicate a problem and should be inspected by a technician.

How can I improve the efficiency of my Worcester Greenstar Plus Hybrid heat pump?

To improve efficiency, ensure regular maintenance is performed, keep filters clean, and ensure that your home is well-insulated. Adjust thermostat settings to avoid unnecessary energy use.

What should I do if the heat pump is leaking water?

Water leaks may be caused by a blocked condensate drain or other issues. Check the drain for blockages and clear any debris. If the leak continues, contact a professional for further assessment.

How can I reset my heat pump after a power outage?

To reset your heat pump after a power outage, turn off the unit from the main power supply, wait a few minutes, and then turn it back on. This allows the system to reboot and may resolve any temporary issues.