Whirlpool WGD6605MW Quick Start Guide
![Whirlpool WGD6605MW Dryer manual cover](/images/kaRBAUcPKHczXGGpglqdnFeb/thumbs/thumb175x175.webp)
To clean the lint filter, open the dryer door and locate the lint screen on the bottom of the door opening. Pull the lint screen straight up, roll any lint off with your fingers, and replace the screen securely back into position.
If your dryer is not starting, ensure it is plugged in and the door is closed completely. Check the circuit breaker or fuse box to ensure power is supplied. Also, verify the start button is fully pressed.
If the dryer is taking longer to dry, check if the lint screen is clean and that the exhaust vent is not blocked. Additionally, ensure the load size is appropriate and avoid overloading the dryer.
To reduce wrinkles, promptly remove clothes from the dryer at the end of the cycle. You can also use the Wrinkle Shield™ option to periodically tumble clothes without heat.
If the dryer is not heating, ensure the gas supply is turned on. Check if the lint screen and exhaust vent are clean. If the issue persists, it may require a service technician to inspect thermal fuses or gas valve coils.
Yes, you can use dryer sheets in the Whirlpool WGD6605MW Dryer. Place the sheet on top of the load before starting the dryer. Avoid using more than one sheet to prevent residue build-up on the lint screen.
It is recommended to clean the exhaust vent every 1-2 years to ensure optimal performance and prevent fire hazards. More frequent cleaning may be necessary if you notice drying performance issues.
The Whirlpool WGD6605MW Dryer can handle a large capacity of up to 7.4 cubic feet. However, for optimal drying, do not overload the dryer and allow space for clothes to tumble freely.
To prevent static cling, use fabric softener sheets or add a small amount of white vinegar to the rinse cycle in your washer. Additionally, avoid over-drying clothes in the dryer.
Regularly clean the lint filter before each load, inspect and clean the exhaust vent annually, and ensure the dryer is level. Periodically check the drum seals and door seal for wear and tear.