Vizio SB46514-F6 Quick Start Guide
![Vizio SB46514-F6 TV manual cover](/images/LIebuIoKanSCbFHwymaHwKWa/thumbs/thumb175x175.webp)
To connect the Vizio SB46514-F6 to your TV, use an HDMI cable to connect the HDMI OUT (ARC) port on the soundbar to the HDMI ARC port on your TV. Make sure your TV's ARC feature is enabled in the settings.
First, check if the soundbar is properly connected to the TV and powered on. Ensure the correct input source is selected. If using HDMI ARC, confirm the TV's audio output settings are set to ARC.
Yes, you can play music via Bluetooth. Press the Bluetooth button on the soundbar or remote, and pair your device with the soundbar by selecting "Vizio SB46514" from the list of available devices.
To perform a factory reset, press and hold the Bluetooth and Volume Down buttons on the soundbar for 5 seconds. The LEDs will flash, indicating the reset process is complete.
For optimal audio settings, ensure your TV audio output is set to Dolby Digital or Bitstream. Use the soundbar's EQ settings to adjust bass and treble to your preference.
Firmware updates are automatically downloaded and installed when the soundbar is connected to the internet via Wi-Fi. Ensure your soundbar is connected to your network for automatic updates.
Check if the remote's batteries are functioning and properly installed. Ensure there are no obstructions between the remote and the soundbar. Try power cycling the soundbar and pairing the remote again.
To wall-mount the soundbar, use the included mounting template to mark the drill holes on the wall. Install the brackets using the screws provided, and then attach the soundbar securely to the brackets.
Use a soft, dry cloth to clean the exterior of the soundbar. Avoid using chemicals or abrasive materials. Regularly check for dust buildup around the vents and ensure any connections are secure.
The Vizio SB46514-F6 is a complete 5.1.4 system with subwoofer and rear satellite speakers included. It is not designed to be expanded with additional speakers.