Viking VUWC515G Use and Care Manual
![Viking VUWC515G Cellar manual cover](/images/LxEnPSYDklqWNIxqgJylZJWR/thumbs/thumb175x175.webp)
To adjust the temperature, locate the control panel on the interior of the unit. Use the arrow buttons to set your desired temperature, then press 'Enter' to confirm.
First, check if the cellar is plugged in and the power is on. Ensure the door is sealing properly and not blocked by bottles. If the issue persists, it might require professional maintenance.
To clean the interior, unplug the unit and remove all bottles. Use a mild detergent and warm water to wipe down the surfaces. Avoid using abrasive cleaners or materials.
Regular maintenance includes cleaning the condenser coils every six months, checking door seals, and ensuring proper ventilation around the unit.
First, unplug the cellar. Gently remove the light cover and replace the bulb with a new one of the same type and wattage. Reattach the cover and plug the unit back in.
Organize bottles by type or region, and store them on their sides to keep the corks moist. Ensure there is space for air circulation around each bottle.
Condensation can occur due to high humidity or if the door seal is compromised. Ensure the door is properly closed and check the room's humidity levels.
Noisy operation can result from improper leveling or loose components. Ensure the unit is level, and check that all internal parts are securely fastened.
Try resetting the unit by unplugging it for a few minutes and then plugging it back in. If the issue continues, it may need professional servicing.
It is not recommended to install the cellar in a garage due to temperature fluctuations. It should be placed in a controlled indoor environment for optimal performance.