Viking VTB5420 Installation Guide
![Viking VTB5420 Refrigerator manual cover](/images/XRtjAiTxKorqZtQNXkAXLhaZ/thumbs/thumb175x175.webp)
To change the water filter, locate the filter compartment inside the refrigerator. Turn the old filter counterclockwise to remove it. Insert the new filter and turn it clockwise until it locks into place. Run water through the dispenser for 5 minutes to prime the filter.
First, check if the refrigerator is plugged in and the thermostat is set to the correct temperature. Make sure the vents inside the refrigerator are not blocked. Clean the condenser coils and ensure the door seals are intact. If the issue persists, contact customer service.
To reset the ice maker, locate the on/off switch and turn it off. Wait for about 30 seconds and then turn it back on. This should reset the ice maker. If it does not resolve the issue, check the water supply line.
Regular maintenance includes cleaning the condenser coils every 6 months, replacing the water filter every 6 months, and checking door seals regularly for wear and tear. Defrost the freezer if ice buildup occurs.
To adjust the shelves, simply lift the front of the shelf and pull it out. Choose the desired height and reinsert the shelf by tilting it up slightly and sliding it into the new position.
Condensation can occur if the door is frequently opened or not closed tightly. Check the door seals for damage. Also, ensure the refrigerator is not overfilled, as this can block airflow and cause moisture buildup.
To level your refrigerator, locate the leveling legs at the front. Use a wrench to adjust the legs by turning them clockwise to raise or counterclockwise to lower the refrigerator. Ensure the refrigerator is level from side to side and front to back.
Unusual noises can be caused by the refrigerator being unlevel, items inside vibrating, or the condenser fan being obstructed. Level the refrigerator, rearrange items, and check for obstructions. If the noise persists, contact a service technician.
Yes, but ensure there is sufficient space for the doors to open fully. Leave at least 2 inches of space between the refrigerator and the wall for proper air circulation.
To clean the interior, remove all food items and shelves. Use a mixture of mild detergent and warm water to wipe down the surfaces. Rinse with clean water and dry thoroughly before replacing shelves and food.