Viking VDSC305 Installation Guide
![Viking VDSC305 Range manual cover](/images/ctbvJogsPhhojKgxOMadZWSA/thumbs/thumb175x175.webp)
To clean the grates, remove them from the range and soak in warm, soapy water. Use a non-abrasive scrub brush to remove any residue. Rinse and dry thoroughly before placing them back on the range.
Ensure that the oven is set to the correct temperature and mode. Check if the oven door is sealing properly. If the problem persists, it may be necessary to inspect or replace the heating element or thermostat.
Use soft cloths or sponges for cleaning, and avoid abrasive cleaners. Be cautious when placing heavy pots and pans on the surface to prevent scratches.
It is recommended to clean the range surface, grates, and burners weekly. Inspect and clean the oven every few months, and have a professional check the gas connections and safety features annually.
A clicking noise is normal as it indicates the ignition system is working to light the burners. If the clicking continues after ignition, the burners may need cleaning or aligning.
To calibrate the oven temperature, access the oven control panel and adjust the temperature settings according to the user manual. It may require professional calibration if the issue persists.
Ensure the burner is clean and free from debris. Check if the burner cap is properly aligned. If the problem persists, it might be necessary to clean the burner ports or replace the burner.
To reset the control panel, disconnect the range from the power source for a few minutes, then reconnect it. This can help resolve minor glitches or errors.
Check if the light bulb is burnt out and replace it if necessary. Ensure the light switch is functioning properly. If the light still does not work, there may be an electrical issue that requires professional service.
During a power outage, avoid using the range's electronic features. Use a match or lighter to ignite burners manually if necessary, and ensure the range is turned off once power is restored.