Viking VCFF236 Use and Care Manual
![Viking VCFF236 Refrigerator manual cover](/images/rgHyWPKbJCudTyNmPxfHjFcu/thumbs/thumb175x175.webp)
To adjust the temperature, locate the digital control panel inside the refrigerator. Use the arrow buttons to increase or decrease the temperature for both the refrigerator and freezer sections.
Check if the refrigerator is properly plugged in and the circuit breaker is not tripped. Ensure that the doors are sealing properly and not obstructed. If the issue persists, consider cleaning the condenser coils or contacting a service technician.
It is recommended to clean the condenser coils every 6-12 months to ensure optimal performance and energy efficiency.
The ideal temperature for the refrigerator section is 37°F (3°C), and for the freezer section, it is 0°F (-18°C).
To replace the water filter, locate the filter compartment inside the refrigerator. Turn the old filter counterclockwise to remove it, and install the new filter by turning it clockwise until it is securely in place.
Unusual noises can be caused by the refrigerator being unlevel, items inside vibrating, or the compressor working harder than usual. Ensure that the refrigerator is level and that items inside are not touching the walls.
To prevent ice buildup, make sure the freezer door is sealing properly. Avoid placing hot items directly into the freezer and ensure that the air vents inside are not blocked.
Check that the ice maker is turned on and the water supply line is not kinked or blocked. Also, ensure that the freezer temperature is set correctly. If the issue persists, consult the user manual or contact a technician.
To reset the refrigerator, unplug it from the power outlet for about 5 minutes, then plug it back in. This can help resolve minor issues with the control system.
Regular maintenance tasks include cleaning the condenser coils, checking and replacing the water filter, inspecting door seals, and ensuring adequate ventilation around the refrigerator.