Viking RVM320SS Use and Care Manual

To set the clock on your Viking RVM320SS Microwave, press the 'Clock' button, then enter the time using the number pad. Press 'Clock' again to confirm.
To clean the interior, use a mild dish soap with warm water and a soft cloth. Avoid using abrasive cleaners or scouring pads, as they can damage the surface.
A humming noise is normal and is typically caused by the magnetron operating. If the noise becomes unusually loud, it may require service.
Check that the door is fully closed and the turntable is properly in place. If the issue persists, it could be a problem with the magnetron or other internal components, requiring professional repair.
Regularly clean the interior and leave the door open for a few minutes after cooking to allow moisture and odors to escape. Using a bowl of vinegar and water steamed for a few minutes can also help eliminate odors.
No, you should not use metal containers in the microwave as they can cause arcing and damage the appliance. Use microwave-safe glass or plastic containers instead.
To replace the light bulb, unplug the microwave and remove the screws on the back panel. Locate the bulb, remove it, and replace it with a new one of the same type. Reattach the panel and plug the microwave back in.
Use the defrost function, which automatically sets the power level to 30%. You can also manually set the power level to 30% if you prefer.
The charcoal filter should be replaced every 6 to 12 months, depending on usage. Check your user manual for specific instructions on your model.
First, try resetting the microwave by unplugging it for a few minutes and then plugging it back in. If the touchpad is still unresponsive, it may need professional repair.