Viking FDW101 Use and Care Manual

To reset your Viking FDW101 dishwasher, press and hold the Start/Stop button for about 3 seconds until the display shows "RESET" or the indicator lights flash. This will cancel the current cycle and reset the dishwasher.
First, ensure that the drain hose is not kinked or clogged. Check the filter and remove any debris. If the problem persists, inspect the drain pump for blockages or damages and clean or replace it if necessary.
It is recommended to clean the filter every one to three months, depending on usage. Regular cleaning helps maintain optimal performance and prolongs the life of your dishwasher.
The Viking FDW101 dishwasher offers several cycles, including Normal, Heavy, Quick, and Auto. Each cycle is designed for different levels of soiling and load sizes. Refer to the user manual for detailed descriptions.
Yes, using rinse aid in your Viking FDW101 dishwasher is recommended to improve drying performance and prevent water spots on dishes. Fill the rinse aid dispenser according to the manufacturer's instructions.
Check the door seal for damage or debris and clean or replace it if necessary. Ensure that the dishwasher is level and inspect the hoses and connections for leaks. If the issue persists, contact a service professional.
Place larger items such as pots and pans on the bottom rack, and smaller items like glasses and cups on the top rack. Ensure that dishes do not block the spray arms and that items are not nested together for optimal cleaning.
Unusual noises can be caused by items rattling against each other or the spray arm. Ensure that dishes are loaded properly and check the spray arms for obstructions. If noises persist, inspect the motor and pump for issues.
Make sure that the spray arms are not blocked and are rotating freely. Check the filter for debris and clean it. Use the correct amount of detergent and ensure that the water temperature is at least 120°F (49°C) for optimal cleaning.
To improve drying performance, ensure that the rinse aid dispenser is filled. Use a heated dry option if available, and open the dishwasher door slightly after the cycle ends to allow steam to escape.