Viking DUAR143D Installation Guide
![Viking DUAR143D Refrigerator manual cover](/images/SyrKTUvpDyOZEfvQuimGxyIB/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the control panel inside the refrigerator. Use the up and down arrows to set the desired temperature for both the refrigerator and freezer compartments.
First, check if the refrigerator is plugged in and the circuit breaker is not tripped. Ensure the temperature settings are correctly set. Clean the condenser coils and check for any obstructions around the unit.
It is recommended to clean the condenser coils every 6 months to maintain optimal performance and efficiency.
Frost buildup can occur if the freezer door is not sealing properly. Check the door gasket for any damage or debris and ensure the door closes tightly. Also, avoid leaving the door open for extended periods.
To replace the water filter, locate the filter compartment inside the refrigerator. Turn the old filter counterclockwise to remove it. Insert the new filter and turn it clockwise until it is securely in place.
Ensure the refrigerator is level and not in contact with any walls or cabinets. Check for loose parts or debris around the compressor area. If the noise persists, contact a professional technician.
Ensure the ice maker is turned on and the water supply line is connected and not kinked. Check the water filter for blockages and replace it if necessary.
Yes, the door swing direction can be changed. Refer to the user manual for detailed instructions or contact Viking customer support for assistance.
Regular maintenance includes cleaning the condenser coils, checking and replacing the water filter, inspecting the door gaskets, and ensuring the refrigerator is level.
Check the refrigerator's drainage system for clogs and ensure the water filter is properly installed. Also, inspect the water line connections for leaks. If the problem persists, consult a technician.