Viking DIV600 600 CFM Installation Guide
![Viking DIV600 600 CFM Ventilator manual cover](/images/AAOXOvKRwIjnTgXdiOOxgiWt/thumbs/thumb175x175.webp)
To clean the Viking DIV600 Ventilator, remove the grease filters and wash them in warm soapy water or in the dishwasher. Wipe the exterior with a soft cloth and mild detergent, then dry thoroughly.
To change the light bulb, first ensure the unit is off and cool. Remove the light cover by gently pressing and turning it counterclockwise. Replace with a new bulb, then reattach the cover.
If the ventilator is noisy, check for obstructions in the fan or ductwork, ensure the installation is secure, and clean the fan blades and filters. If noise persists, contact a service professional.
Filters should be cleaned every month and replaced every 6-12 months depending on usage. Refer to the user manual for specific guidance.
Yes, the Viking DIV600 can be installed as a recirculating unit. Additional components like a charcoal filter kit may be required. Consult the installation manual for details.
For optimal performance, use rigid or semi-rigid ducting with minimal elbows. The recommended duct size is 6 inches. Avoid using flexible ducting as it can reduce efficiency.
To reset the filter cleaning reminder, press and hold the filter reset button until the indicator light turns off. Refer to the control panel section of your manual for specifics.
Check the power supply, ensure the circuit breaker is not tripped, and verify that the unit is properly connected. If the issue persists, consult a qualified technician.
Yes, the Viking DIV600 Ventilator typically comes with a limited warranty. Check your warranty documentation for specific terms and coverage details.
The fan speed on the Viking DIV600 can be adjusted using the control panel. Select from multiple speed settings to suit your ventilation needs. Refer to the manual for detailed instructions.