Viking DERT301 Installation Guide
![Viking DERT301 Rangetop manual cover](/images/CQSKbCFDaVqsPXuQunDvJnAs/thumbs/thumb175x175.webp)
To clean the grates, first allow them to cool. Then, remove them from the rangetop and wash them in warm soapy water. Use a non-abrasive scrub pad to remove any stubborn stains. Rinse thoroughly and dry before placing them back on the rangetop.
Ensure the burner cap is properly seated. If it still doesn’t ignite, check if the igniter is clicking and if there is gas flow. Clean the burner ports with a needle if they are clogged and check for any power supply issues.
Yes, the rangetop can be converted from natural gas to propane. It requires a conversion kit and should be performed by a qualified technician to ensure safety and proper operation.
Regular cleaning should be done after each use. Deep cleaning and inspection of burners, grates, and igniters should be done every 6 months. Annual professional maintenance is recommended for optimal performance.
If the electric igniter is not functioning, light the burner manually using a match or lighter. Turn the knob to the 'Lite' position and carefully bring the flame close to the burner until it ignites.
To adjust the flame height, turn the control knob to a lower setting. If the flame is uneven or too high even at low settings, the burners may need cleaning or adjustment by a technician.
The clicking sound is the igniter trying to light the burner. If it persists after ignition, ensure the burner cap is properly aligned and dry. Continuous clicking may require service to check the igniter switch.
Use cookware with flat, smooth bottoms and made from materials such as stainless steel, cast iron, or aluminum. Avoid using glass or ceramic cookware as they may not conduct heat efficiently.
Use a soft cloth for cleaning and avoid abrasive pads or cleaners. Wipe in the direction of the grain and ensure spills are cleaned promptly to prevent residue from hardening.
If the control knobs are difficult to turn, they may need cleaning. Remove the knobs and clean them with warm soapy water. Ensure there is no residue causing obstruction, and check the stem for any visible issues.