Vauxhall Mokka 2014 Infotainment Manual

To reset the tire pressure monitoring system, ensure all tires are properly inflated, then turn on the ignition without starting the engine. Press the menu button on the steering wheel until you see the tire pressure screen, then press and hold the set/reset button until you hear a confirmation beep.
The recommended oil type for the Vauxhall Mokka 2014 is fully synthetic 5W-30 motor oil.
To pair your phone, enable Bluetooth on your phone, then press the 'Config' button on the infotainment system. Select 'Phone Settings' and then 'Pair Device'. Choose your car's system from the list on your phone and confirm the pairing code.
Engine overheating in the Vauxhall Mokka 2014 could be caused by a coolant leak, a faulty thermostat, or a malfunctioning radiator fan. Check the coolant level and inspect for leaks. If the issue persists, consult a mechanic.
To replace the key fob battery, use a small flathead screwdriver to gently pry open the key fob case. Remove the old battery and insert a new CR2032 battery, ensuring the positive side faces up. Snap the case back together securely.
To change the headlight bulb, open the bonnet and locate the back of the headlight assembly. Remove the rubber cover and disconnect the wiring harness. Release the retaining clip and remove the old bulb. Insert the new bulb, ensuring not to touch the glass, and reassemble.
The towing capacity of the Vauxhall Mokka 2014 is approximately 1,200 kg (2,646 lbs) for braked trailers, depending on the engine variant.
It is recommended to service your Vauxhall Mokka 2014 every 12 months or 20,000 kilometers (12,000 miles), whichever comes first. Regular services help maintain vehicle performance and reliability.
Common causes for the check engine light include a loose fuel cap, faulty oxygen sensor, malfunctioning catalytic converter, or issues with the ignition system. It is advisable to use a diagnostic tool to determine the exact cause.
To enable cruise control, press the cruise control button on the steering wheel. Once the indicator light appears on the dashboard, accelerate to your desired speed and press the 'SET' button. Use the '+' and '-' buttons to adjust the speed.