Triumph Speed Triple R 2016 Owner's Handbook
![Triumph Speed Triple R 2016 Motorcycle manual cover](/images/PkOUFWRGvCjHOKxUvHtTXDuF/thumbs/thumb175x175.webp)
The recommended tire pressure for the Triumph Speed Triple R 2016 is 36 PSI for the front tire and 42 PSI for the rear tire.
It is recommended to change the oil every 6,000 miles or 12 months, whichever comes first, to ensure optimal engine performance.
You should use a high-quality ethylene glycol-based coolant with corrosion inhibitors that is specifically designed for aluminum engines.
To adjust the suspension, refer to the owner's manual for specific settings. Use the adjusters on the forks and shock absorber to fine-tune preload, compression, and rebound damping.
The front wheel nut should be torqued to 65 Nm (48 lb-ft) and the rear wheel nut to 110 Nm (81 lb-ft).
To reset the service light, you will need to use a diagnostic tool compatible with Triumph motorcycles or visit a Triumph dealer for assistance.
The proper chain tension should allow for 20-30mm (0.8-1.2 inches) of slack at the midpoint of the chain's bottom run.
To check the brake fluid level, locate the brake fluid reservoirs for both front and rear brakes and ensure the fluid level is between the minimum and maximum marks.
The recommended spark plug for the Triumph Speed Triple R 2016 is the NGK CR9EK. Always ensure the spark plug gap is set to the manufacturer’s specifications.
To access the battery, remove the seat by using the key to unlock it, then locate and remove the battery cover to access the battery for replacement.