Triumph Bonneville T100 2016 Owner's Handbook
![Triumph Bonneville T100 2016 Motorcycle manual cover](/images/oJaTaMVJuMCArecENRSgdwXN/thumbs/thumb175x175.webp)
The recommended tire pressure for the Triumph Bonneville T100 2016 is 33 psi for the front tire and 38 psi for the rear tire.
To perform an oil change on a Triumph Bonneville T100 2016, warm up the engine, place the bike on a stand, remove the oil drain plug, drain the oil, replace the oil filter, and refill with the recommended oil type and quantity.
For the Triumph Bonneville T100 2016, use a high-quality 10W-40 semi-synthetic motorcycle engine oil.
Check the battery charge, inspect the starter motor, ensure the fuel supply is adequate, and verify that the kill switch is not engaged.
It is recommended to service the Triumph Bonneville T100 2016 every 6,000 miles or 12 months, whichever comes first.
If the engine overheats, stop the motorcycle, turn off the engine, allow it to cool down, check the coolant level, and inspect the radiator for blockages.
To adjust the chain tension, place the bike on a stand, loosen the rear axle nut, adjust the chain tension bolts evenly on both sides, and ensure the tension is within the manufacturer's specifications before tightening the axle nut.
The correct spark plug gap for the Triumph Bonneville T100 2016 is 0.7 to 0.8 mm.
To improve fuel efficiency, maintain proper tire pressure, ensure regular servicing, use high-quality fuel, and avoid aggressive acceleration and braking.
Common electrical issues include faulty connections, blown fuses, and battery problems. Check and clean connections, replace blown fuses, and ensure the battery is charged and in good condition.