Triumph Speed Triple 94 2016 Owner's Handbook

To check the oil level, ensure the motorcycle is on level ground. Warm up the engine, turn it off, and wait a few minutes. Use the dipstick or sight glass to check the oil level, ensuring it is between the minimum and maximum marks.
Use a high-quality, fully synthetic 10W-40 motorcycle oil that meets or exceeds manufacturer specifications. Always refer to the owner's manual for specific recommendations.
Check the battery charge and connections, inspect the fuses, and ensure the fuel supply is adequate. If the issue persists, it may be necessary to consult a professional mechanic.
The recommended tire pressure is typically 34 psi for the front tire and 42 psi for the rear tire, but you should always verify this information with the motorcycle's manual or the tire manufacturer's guidelines.
Regular maintenance is recommended every 6,000 miles or 12 months, whichever comes first. This includes oil changes, checking brake fluids, and inspecting the chain and tires.
Loosen the axle nut, adjust the chain tension using the adjuster bolts, and ensure the slack is within the recommended range (typically 20-30mm). Tighten the axle nut and recheck the alignment.
Remove the seat and fuel tank to access the airbox. Open the airbox and replace the old air filter with a new one, ensuring it is seated correctly. Reassemble the components in reverse order.
Common causes include low coolant levels, a faulty radiator fan, or a clogged radiator. Regular maintenance and checks can prevent overheating issues.
Adjust the suspension by using the preload, compression, and rebound damping adjusters found on the forks and rear shock. Refer to the owner's manual for detailed guidance specific to rider weight and riding conditions.
Inspect for loose components, check the oil level and condition, and listen for specific sounds that might indicate mechanical issues. If unsure, seek help from a professional mechanic to diagnose the problem.