Triumph Bonneville T100 Black AT 2018 Owner's Handbook
![Triumph Bonneville T100 Black AT 2018 Motorcycle manual cover](/images/YfdyXZOvZJWaPJqyJQfpGyjW/thumbs/thumb175x175.webp)
To perform an oil change, warm up the engine, place the bike on a level surface, remove the oil drain plug, and let the oil drain completely. Replace the drain plug and oil filter, then refill with the recommended oil type and quantity. Check the oil level and dispose of the old oil properly.
The recommended tire pressure is 36 psi for the front tire and 42 psi for the rear tire. Always check the tire pressure when the tires are cold for accurate measurements.
Check the battery connections and ensure they are clean and tight. Verify the fuel level and quality, inspect the spark plugs, and ensure the kill switch is in the 'run' position. If the problem persists, consult a professional mechanic.
The maintenance schedule includes regular checks and services at intervals such as 500 miles, 6,000 miles, and 12,000 miles, including oil changes, brake inspections, and chain adjustments. Refer to the owner's manual for detailed schedules.
To adjust the chain tension, place the motorcycle on a stand, loosen the axle nut, and turn the adjuster bolts on either side of the swingarm evenly until the correct tension is achieved. Tighten the axle nut and recheck the tension.
Use a high-quality ethylene glycol-based coolant that is free of silicates, nitrates, and phosphates, mixed in a 50/50 ratio with distilled water. Ensure the coolant is suitable for aluminum engines.
To improve fuel efficiency, maintain proper tire pressure, perform regular maintenance, avoid aggressive acceleration, and use recommended fuel grades. Also, ensure the chain is well-lubricated and tensioned correctly.
Common brake issues include spongy brakes and uneven braking. Ensure the brake fluid is at the correct level and free of air bubbles. Check brake pads for wear and replace them if necessary. If issues persist, consult a professional.
For winter storage, clean and dry the bike, fill the fuel tank with stabilized fuel, change the oil, and remove the battery to store it in a cool, dry place. Cover the bike with a breathable cover and store it in a dry location.
If the engine overheats, pull over safely and turn off the engine. Allow it to cool before checking coolant levels and inspecting for leaks. Ensure the radiator is not obstructed and seek professional assistance if necessary.