Trek Bosch eBike Systems Intuvia Owner's Manual
![Trek Bosch eBike Systems Intuvia Bicycle manual cover](/images/HjrJwGMQtKdTkyeFjuXkXEDD/thumbs/thumb175x175.webp)
To reset your Intuvia display, press and hold the 'Reset' button located on the top of the display unit. This will reset trip distance and average speed without affecting the total distance.
Ensure that the battery is properly connected and charged. Check the connections between the display and the battery. If the problem persists, consult your dealer or a qualified technician.
To update the firmware, visit an authorized Bosch eBike dealer where they can perform the update using Bosch diagnostic tools.
Use the 'Mode' button on the remote control to switch between different levels of assistance such as Eco, Tour, Sport, and Turbo.
Use a soft, damp cloth to gently wipe the display. Avoid using harsh chemicals or pressure washers as they can damage the electronics.
Press the 'i' button repeatedly until 'Settings' is displayed, then use the '+' and '-' buttons to navigate to 'Contrast' and adjust it to your preference.
Yes, you can customize the display by using the 'i' button to scroll through available information such as speed, trip distance, range, and more.
To remove the display, press the release button on the bottom of the mount and slide the display upwards. To reinstall, align the display with the mount and slide it down until it clicks into place.
Consult the user manual for a list of error codes and their meanings. For serious issues, contact your dealer or a Bosch-certified technician for assistance.
To extend battery life, use lower assistance levels when possible, regularly check tire pressure, and avoid rapid acceleration. Make sure to charge the battery following Bosch's guidelines.