Toyota Tundra TVIP V5 RS3200 PLUS 2014 Owner's Guide

To activate the TVIP V5 RS3200 PLUS system, close all doors and press the lock button on your key fob. The security LED will start flashing, indicating the system is armed.
Ensure that all doors, including the hood and tailgate, are properly closed. Check the battery in your key fob and replace it if necessary. If the problem persists, consult your user manual or contact a Toyota service center.
To deactivate the alarm, press the unlock button on your key fob. Alternatively, you can insert the key into the ignition and turn it to the ON position.
The typical range for the key fob is approximately 30 feet. However, this may vary depending on environmental factors such as obstacles and interference.
To reset the system, disconnect the negative battery terminal for about 5 minutes, then reconnect it. This will reset the vehicle's electronic systems, including the security system.
The sensitivity of the TVIP V5 RS3200 PLUS system is generally fixed. For specific adjustments, consult your user manual or contact a certified Toyota technician.
Regularly check the functionality of your key fob and replace its battery every 1-2 years. Ensure all sensors and alarms are functioning properly by conducting periodic tests.
Arm the system and manually open a door or the hood. The alarm should trigger, indicating the system is working correctly. Always ensure you have the key fob handy to deactivate the alarm.
False alarms can be caused by environmental factors such as strong winds or vibrations. Ensure all sensors are properly mounted and not overly sensitive.
The TVIP V5 RS3200 PLUS system is typically covered under Toyota's vehicle warranty. Refer to your warranty booklet for specific terms and conditions.