Toyota Sienna TVIP V5 RS3200 PLUS 2011 Owner's Guide
![Toyota Sienna TVIP V5 RS3200 PLUS 2011 Minivan manual cover](/images/USaYwkrzcEiVDbETjRSTzfUK/thumbs/thumb175x175.webp)
To activate the TVIP V5 RS3200 PLUS, press the lock button on your key fob. The system will beep once and the hazard lights will flash to indicate activation.
Ensure all doors, including the trunk, are closed properly. If the issue persists, check the key fob battery and replace it if necessary.
Press the unlock button on your key fob to deactivate the alarm. Alternatively, inserting the key into the ignition and turning it to the 'ON' position will also disarm the alarm.
A continuously flashing security indicator light indicates that the alarm system is armed and functioning correctly.
To reset the system, disconnect the vehicle battery for about 10 minutes. Reconnect the battery and test the system by arming and disarming it.
Open the key fob by prying it apart with a flathead screwdriver. Remove the old battery and replace it with a new CR2032 battery, ensuring the positive side faces up. Snap the key fob back together.
Yes, the TVIP V5 RS3200 PLUS can be retrofitted to a used 2011 Toyota Sienna by an authorized dealer or a professional installer.
To test the system, roll down a window, arm the system, and then manually unlock the door through the open window. Opening the door should trigger the alarm.
Regularly check and replace the key fob battery. Ensure all system components are secure and check for any visible damage to the wiring or sensors.
The auto-arming feature is typically not adjustable by the user. Consult your vehicle's manual or contact a professional for further assistance.