Toyota Sequoia 2012 Owner's Manual

To reset the maintenance light, turn the key to the "ON" position while holding the odometer button. Keep holding the button until the light resets, which usually takes about 10 seconds.
The 2012 Toyota Sequoia has a towing capacity of up to 7,400 pounds, depending on the model and equipment.
It is recommended to change the oil every 5,000 miles or 6 months, whichever comes first, for optimal engine performance.
The 2012 Toyota Sequoia typically requires 5W-30 synthetic oil for optimal performance and efficiency.
To replace a headlight bulb, open the hood, disconnect the electrical connector from the back of the headlight assembly, remove the old bulb by twisting it counterclockwise, insert the new bulb, and reconnect the electrical connector.
Common issues include premature wear of the ball joints, struts, and bushings. Regular inspections and timely replacements can prevent further damage.
To improve fuel efficiency, ensure regular maintenance, keep tires properly inflated, use the recommended grade of motor oil, and avoid aggressive driving habits.
The recommended tire pressure for a 2012 Toyota Sequoia is typically 32 psi for both front and rear tires, but it is best to verify with the sticker located on the driver's side door jamb.
Start by checking the AC fuse and relay, inspect for leaks in the refrigerant lines, ensure the compressor clutch engages, and verify that the blower motor is functioning properly.
For long-term storage, fill the gas tank, change the oil, inflate the tires to the proper pressure, disconnect the battery, and use a car cover to protect the vehicle from dust and debris.