Toyota RAV4 TVIP V5 RS3200 PLUS 2013 Owner's Guide
![Toyota RAV4 TVIP V5 RS3200 PLUS 2013 SUV manual cover](/images/mInWYJfqaOJCuAKqDiEAyjpn/thumbs/thumb175x175.webp)
To arm the security system, ensure all doors, the hood, and the trunk are closed. Lock the vehicle using the key fob. The system will beep once and the hazard lights will flash once to confirm it is armed.
If the alarm activates unexpectedly, first disarm the system using the key fob. Check for any open doors, windows, or trunk, as well as any potential interference with the system's sensors.
To temporarily disable the alarm, unlock the vehicle using the key fob while the system is armed, then start the engine within 30 seconds. This will prevent the alarm from being triggered.
If the system does not arm, check that all doors, hood, and trunk are fully closed. Also, ensure the key fob battery is not depleted and that it is within range.
To replace the key fob battery, open the fob using a small flathead screwdriver. Remove the old battery and insert a new CR2032 battery, ensuring the positive side faces up. Reassemble the fob.
Regularly inspect the sensors and wiring for any damage. Replace the key fob battery annually or if the range diminishes. Check for system firmware updates at your Toyota dealership.
To reset the system, disconnect the vehicle's battery for about 15 minutes. Reconnect the battery, and the system should reset. If problems persist, consult a professional technician.
This can occur if the system detects a weak battery or a malfunctioning sensor. Check the battery voltage and inspect the sensors for any debris or damage.
Yes, the sensitivity can be adjusted, but it typically requires a professional technician to access the system's control module and calibrate the sensitivity settings.
If the key fob is lost or damaged, contact your Toyota dealership for a replacement. They will program the new fob to match your vehicle's security system.