Toyota Prius Prime Quick Guide 2018 Owner's Manual
![Toyota Prius Prime Quick Guide 2018 Hatchback manual cover](/images/hdHkiPfxTQuResIDoRtLQYPe/thumbs/thumb175x175.webp)
To charge your Prius Prime, locate the charging port on the passenger side rear quarter panel. Open the port, then connect the charging cable to a standard 120V outlet or a 240V charging station for faster charging.
The 2018 Toyota Prius Prime offers an estimated EV range of approximately 25 miles on a full charge, depending on driving conditions and habits.
To switch modes, use the EV/HV button located on the center console. Press the button to toggle between EV mode, HV mode, and EV Auto mode.
The main maintenance for the Prius Prime battery is regular inspection during scheduled service checks. Ensure proper charging habits and avoid extreme temperatures to prolong battery life.
If your Prius Prime is not starting, check if the key fob battery is functioning and if the vehicle is in Park. Also, ensure that the 12V auxiliary battery is charged.
It's recommended to service your Prius Prime every 5,000 miles or six months, whichever comes first. This includes oil changes, tire rotations, and inspections.
To reset the maintenance required light, turn the vehicle to the ON position without starting the engine, then press the trip meter reset button until the trip meter reads "ODO." Turn off the car, then turn it back on while holding the reset button.
Yes, the Prius Prime 2018 is designed to run on regular unleaded gasoline with an octane rating of 87 or higher.
If the check engine light illuminates, ensure the fuel cap is properly tightened. If the light remains on, consult your Toyota dealer for a diagnostic check.
To improve fuel efficiency, maintain proper tire pressure, use ECO mode, drive at moderate speeds, and reduce excess weight. Regular maintenance also contributes to optimal efficiency.