Toyota Prius C TVIP V5 RS3200 PLUS 2012 Owner's Guide
![Toyota Prius C TVIP V5 RS3200 PLUS 2012 Hatchback manual cover](/images/ByFUlnkBrvfXzTjOYSfLYfgX/thumbs/thumb175x175.webp)
To program a new remote, insert the key into the ignition and cycle it from 'Off' to 'On' five times, ending in 'On'. Open and close the driver’s door twice, then remove the key. The locks should cycle to indicate programming mode. Press any button on the new remote to complete programming.
Ensure all doors, the hood, and the trunk are closed securely. Check the remote battery and replace it if necessary. Verify that the system is not in valet mode, which can prevent arming.
To disable the chirp sound, locate the alarm system control module under the dashboard. Press and hold the override/program button until the indicator light begins to flash, then press and release the button again. The chirp sound will be turned off.
This could be due to a faulty door sensor, a low battery in the remote, or environmental factors such as temperature changes. Inspect the door sensors for damage and replace the remote battery. If the issue persists, consult a professional technician.
While it is possible to install the RS3200 PLUS system yourself, it requires automotive electrical knowledge and tools such as a screwdriver set, wire strippers, and a multimeter. Professional installation is recommended to ensure proper functionality.
To reset the alarm system, insert the key into the ignition and turn it to the ‘On’ position without starting the engine. Wait for the security light to stop flashing, then turn the key to ‘Off’. This should reset the system.
It is recommended to have the alarm system inspected annually during regular vehicle maintenance. Check for any software updates or hardware issues that may affect performance.
Common signs include the alarm not arming or disarming, false alarms, remote key fob not responding, or the security light behaving erratically. If any of these occur, a system inspection is advisable.
To test the system, arm the alarm and attempt to open the door without using the remote. The alarm should sound. Additionally, ensure all sensors and remotes activate the system correctly.
Yes, it is possible to upgrade to a more advanced system. Consult with a professional to assess compatibility and installation requirements for systems such as GPS tracking or remote start capabilities.