Toyota Prius C Navigation System 2019 Owner's Manual
![Toyota Prius C Navigation System 2019 Hatchback manual cover](/images/bPmTVlztqtliscdlygspzoar/thumbs/thumb175x175.webp)
To update the navigation maps on your 2019 Toyota Prius C, visit the official Toyota website and download the latest map update to a USB drive. Insert the USB drive into the vehicle's USB port, and follow the on-screen instructions to complete the update process.
If your navigation system is not showing the current location accurately, ensure that the GPS antenna is not obstructed and that your vehicle is in an open area. If the problem persists, a system reset or software update might be needed.
Yes, you can use voice commands to operate the navigation system. Press the voice command button on the steering wheel and follow the prompts to enter destinations or change settings.
To set a home address, go to the navigation menu, select "Destination," then "Set Home." Enter your home address and confirm to save it for future use.
A frozen navigation screen can often be resolved by restarting the system. Turn off the vehicle, wait a few minutes, and then turn it back on. If the issue continues, a software update or system reset may be needed.
To enter a destination, go to the navigation menu, select "Destination," then choose "Address" or another option. Enter the address or location details, and press "Go" to start the navigation.
If the navigation system does not turn on, check if the vehicle's battery is charged and the fuse associated with the navigation system is intact. If the problem persists, consult a Toyota service center.
To adjust the volume of the navigation voice directions, navigate to the settings menu while the directions are being spoken and use the volume controls to increase or decrease the sound level.
Yes, you can customize the map display settings by going to the "Settings" menu in the navigation system. From there, you can adjust the map orientation, display colors, and other preferences.
To perform a system reset, locate the reset button on the navigation system or consult the owner's manual for specific instructions. This often involves holding down specific buttons on the system for a few seconds.