Toyota Prius 2012 Information Guide
![Toyota Prius 2012 Hatchback manual cover](/images/dImCrdNvWdCSExKiTScsGrWo/thumbs/thumb175x175.webp)
For the 2012 Toyota Prius, it is recommended to change the oil every 10,000 miles or 12 months, whichever comes first, if using synthetic oil. Always check the owner's manual for specific guidance.
The recommended coolant for a 2012 Toyota Prius is Toyota Super Long Life Coolant, which is a pink-colored ethylene glycol-based coolant.
To reset the maintenance required light on a 2012 Toyota Prius, turn the ignition to the "ON" position, press the ODO/TRIP button until the odometer reads ODO, turn the ignition off, hold the ODO/TRIP button, and turn the ignition back to "ON". Continue holding the button until the light goes off.
The recommended tire pressure for the 2012 Toyota Prius is typically 35 psi for the front tires and 33 psi for the rear tires. Always refer to the placard located on the driver's side door jamb for the exact specifications.
To jump-start a 2012 Toyota Prius, connect the positive cable to the positive terminal of the Prius and the donor vehicle, then connect the negative cable to the negative terminal of the donor vehicle and a solid, unpainted metal surface on the Prius. Start the donor vehicle and then the Prius.
Replacing the hybrid battery on a 2012 Toyota Prius can be complex and potentially dangerous due to high voltage. It is recommended to have it replaced by a certified technician.
If your 2012 Toyota Prius won't start, check the 12-volt battery for charge, ensure the key fob has battery power, and make sure the car is in park. If issues persist, consult a professional mechanic.
To replace the cabin air filter in a 2012 Toyota Prius, open the glove box, remove the damper arm, squeeze the sides of the glove box to release it, remove the filter cover, and replace the old filter with a new one.
To replace the headlight bulb in a 2012 Toyota Prius, open the hood, remove the rubber cover behind the headlight assembly, disconnect the electrical connector, unclip the bulb, and replace it with a new one. Ensure the bulb is securely fastened and reconnect the components.
To check the brake fluid level in a 2012 Toyota Prius, locate the brake fluid reservoir in the engine compartment, and ensure the fluid level is between the 'MIN' and 'MAX' marks. If necessary, add the recommended brake fluid type to reach the proper level.