Toyota Land Cruiser 2018 Owner's Manual
![Toyota Land Cruiser 2018 SUV manual cover](/images/XnfYCWiVPWgAYdIjOjwraSMX/thumbs/thumb175x175.webp)
The recommended oil type for the Toyota Land Cruiser 2018 is SAE 0W-20 synthetic oil for optimal performance and efficiency.
It is recommended to change the oil every 10,000 miles or 12 months, whichever comes first, under normal driving conditions.
The 2018 Toyota Land Cruiser has a towing capacity of up to 8,100 pounds when properly equipped.
To reset the maintenance light, turn the ignition to the "ON" position, press and hold the trip meter reset button, then turn the ignition off and back on while continuing to hold the button until the light resets.
The Toyota Land Cruiser 2018 is designed to run on premium unleaded gasoline with an octane rating of 91 or higher.
To pair your phone, enable Bluetooth on your phone, select 'Setup' on the vehicle's display, choose 'Bluetooth', and follow the prompts to add a new device. Confirm the pairing code on both devices to complete the process.
To change a flat tire, ensure the vehicle is on a level surface, loosen the lug nuts, use the jack to lift the vehicle, remove the lug nuts and the flat tire, install the spare tire, hand-tighten the lug nuts, lower the vehicle, and fully tighten the lug nuts in a crisscross pattern.
The Toyota Land Cruiser 2018 features a sealed transmission system. It is recommended to have the transmission fluid checked and serviced by a professional technician during scheduled maintenance.
Common causes of battery drain include leaving lights on, faulty electrical components, a weak battery, or a problem with the alternator. It is advisable to check these components if you experience battery issues.
To engage the four-wheel-drive system, ensure the vehicle is at a complete stop, shift the transmission to neutral, and use the 4WD selector dial to choose between 'H4' for high-range or 'L4' for low-range driving.