Toyota Land Cruiser 2017 Owner's Manual
![Toyota Land Cruiser 2017 SUV manual cover](/images/wscrtbueUUmypmyQMKIfczKN/thumbs/thumb175x175.webp)
The recommended oil type for the 2017 Toyota Land Cruiser is SAE 0W-20 full synthetic oil. Using this type ensures optimal performance and fuel efficiency.
To reset the maintenance light, turn the ignition to the "ON" position, then press the "Trip" button until the odometer displays "ODO." Turn the ignition off, press and hold the "Trip" button, then turn the ignition back to "ON." Hold the button until the maintenance light turns off.
The 2017 Toyota Land Cruiser has a towing capacity of up to 8,100 pounds, making it suitable for towing trailers, boats, and other large loads.
To pair your smartphone, go to the Bluetooth settings on your phone and ensure it is discoverable. On the Land Cruiser's display, select "Setup," then "Bluetooth," and "Add New Device." Select your phone from the list of devices and follow the prompts to complete pairing.
The recommended tire pressure for the 2017 Toyota Land Cruiser is typically 32 psi for both front and rear tires. However, it's always best to verify with the sticker located on the driver's side door jamb.
Improving fuel efficiency can be achieved by maintaining proper tire pressure, ensuring regular engine maintenance, removing excess weight, and driving at moderate speeds.
If the air conditioning is not blowing cold air, it could be due to a low refrigerant level, a clogged air filter, or a malfunctioning compressor. Checking these components and refilling the refrigerant often resolves the issue.
If the check engine light illuminates, check for any loose fuel caps or obvious issues. If no issue is visible, it is advisable to use an OBD-II scanner to identify the error code or consult a professional mechanic.
To change a flat tire, locate the spare tire and jack under the vehicle. Use the jack to lift the vehicle, remove the lug nuts with a wrench, replace the flat tire with the spare, then tighten the lug nuts before lowering the vehicle. Ensure the nuts are securely fastened.
Common causes of battery drain include leaving lights or electronics on, a failing alternator, or a parasitic electrical draw. It is important to ensure all lights are off and to have the electrical system checked if the issue persists.