Toyota Highlander Hybrid 2014 Owner's Manual
![Toyota Highlander Hybrid 2014 SUV manual cover](/images/PBvWuNXyrfBypCUaqViyZItD/thumbs/thumb175x175.webp)
To reset the maintenance light, turn the ignition to the "ON" position without starting the engine. Press the "Odometer/Trip" button until the display reads "ODO." Turn the ignition off. Hold the "Odometer/Trip" button while turning the ignition back to "ON." Continue holding the button until the display shows zeroes.
The recommended oil for a 2014 Toyota Highlander Hybrid is SAE 0W-20 synthetic oil. This oil provides optimal performance and fuel efficiency.
To jump-start, connect the positive cable to the positive terminal of the discharged battery and the donor battery. Connect the negative cable to the negative terminal of the donor battery and an unpainted metal surface on the vehicle with the discharged battery. Start the donor vehicle and then the Highlander. Remove cables in reverse order.
If the vehicle does not start with a new battery, check the battery connections, starter, and alternator. Ensure the shift lever is in 'Park' and the brake pedal is pressed while starting. Consider a diagnostic check if issues persist.
The 2014 Toyota Highlander Hybrid has a towing capacity of 3,500 pounds, making it suitable for towing small trailers or boats.
Improve fuel efficiency by maintaining proper tire pressure, performing regular maintenance, using cruise control on highways, and avoiding unnecessary idling. Gentle acceleration and braking also help conserve fuel.
Some owners report issues with the electrical system, such as the hybrid battery and inverter. Regular maintenance and timely inspections can help mitigate these issues.
It is recommended to change the transmission fluid every 60,000 to 100,000 miles, depending on driving conditions. Check the owner's manual for specific intervals.
If the hybrid system warning light is illuminated, safely pull over and turn off the engine. Restart the vehicle to see if the light clears. If it remains on, consult a Toyota dealer for diagnostic and repair services.
To replace the cabin air filter, open the glove box and remove the limiting stop arm. Push in the sides of the glove box to drop it fully. Remove the filter cover, take out the old filter, and insert the new one. Reassemble in reverse order.