Toyota FJ Cruiser 2012 Owner's Manual
![Toyota FJ Cruiser 2012 SUV manual cover](/images/ywGXdRNnoxImfVlkBbQeFHPe/thumbs/thumb175x175.webp)
To reset the maintenance light, turn the ignition to the "ON" position without starting the engine. Press the odometer button until the display reads "ODO." Turn the ignition off. Hold the odometer button while turning the ignition back to "ON." The maintenance light will flash and then go off.
The recommended oil for the 2012 Toyota FJ Cruiser is 5W-30 synthetic motor oil. Always check your owner's manual for the most accurate information.
To replace the air filter, locate the air filter box in the engine bay. Unclip the fasteners and remove the top cover. Take out the old air filter and replace it with a new one, ensuring it fits securely. Reattach the cover and clip the fasteners back in place.
The 2012 Toyota FJ Cruiser has a towing capacity of up to 5,000 pounds, provided it is properly equipped with a towing package.
If the 4WD system is malfunctioning, check for any warning lights on the dashboard. Inspect the 4WD fuse and wiring for any issues. If these are fine, consult a professional mechanic as the issue may require specialized tools and knowledge.
The recommended tire pressure for the 2012 Toyota FJ Cruiser is typically 32 psi for both front and rear tires. However, always check the tire placard located on the driver's side door jamb for the most accurate information.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Twist and remove the bulb holder. Replace the old bulb with a new one, ensuring not to touch the glass part of the bulb. Reinsert the holder and twist it back into place.
Toyota generally recommends changing the transmission fluid every 60,000 miles. However, check your owner's manual for the most accurate maintenance schedule.
The 2012 Toyota FJ Cruiser has a fuel tank capacity of 19.0 gallons (72 liters).
To engage the rear differential lock, bring the vehicle to a stop and shift into low range. Press the rear differential lock button located on the dashboard. The indicator light should illuminate, indicating the lock is engaged.